We simulate the melt front starting from the injection location. During packing, more material is injected to fill the part in order to compensate the volumetric shrinkage. The Moldflow analysis is used to optimize the design to avoid uncertainties in the production process.

We provide recommendations for more uniform and efficient cooling, leading to improved part quality and shorter cycle time.

We pinpoint the causes of warpage and minimize it to assist customers in optimizing the designs of product and mold and the production parameters.

The entire design process for two-shot overmolding is time consuming and expensive. By simulating the production process, it is possible to analyze the material influence on the parts and to determine the best part design, especially the gate position.

We calculate the effects of each parameter on the results in the production process.

This process is used to reduce the weight of plastic parts and the warpage. Moldflow analysis helps to determine the optimal gate location and achieve efficient foaming distribution.